Product ID:NORSIL SILICONE PRIMER
MSDS Date:02/04/1994
FSC:8040
NIIN:00-118-2695
Kit Part:Y
MSDS Number: BTTRK

R.H.CARLSON COMPANY, INC.

41 CHESTNUT STREET
GREENWICH, CT 06830-5921
US

Emergency Phone: 800-424-9300(CHEMTREC)/203-531-5500

Cage: 33530

R.H.CARLSON COMPANY,INC.

1687 GREENWICH, CT 06830-5921 US

Telephone: 203-531-5500

Cage: 33530

HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 90%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ETHYL SILICATE

CAS: 78-10-4

RTECS: VV9450000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 10 PPM; 9394

THE MANUFACTURER STATES THAT NON-HAZARDOUS SOLIDS ARE

RTECS: 9999999ZZ

Fraction By Weight: 5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WARNING! MAY CAUSE IRRIT. AVOID
CONTACT W/SKIN/EYE/CLOTHING. DIRECT CONTACT W/UNCURED PRODUCT MAY
CAUSE IRRIT. PROLONGED SKIN CONTACT MAY CAUSE DERM. INHAL OF VAPORS
MAY PRODUCE RESP IRRIT. INGEST OF MATL IS HARMFUL AND MAY PRODUCE
ABDOMINAL PAIN & DIARRHEA.
Effects of Overexposure:DERMITITS. SKIN IRRIT. RESP IRRIT, DIZZINESS,
HEADACHE, NAUSEA, MENTAL CONFUSION. ABDOMINAL PAIN AND DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MFG.

First Aid:INGEST:DON'T INDUCE VOMIT.IF VOMIT GIVE MORE FLUID.LET DR
DETERMINE IF CONDITION OF PATIENT WILL PERMIT EVACUATION OF
STOMACH.DON'T GIVE FLUID TO UNCONSC PERSON.SKIN:FLUSH W/WATER FOR
15MINS.REMOVE CO NTAMIN CLOTH/SHOE.GET MED ATTN IF
IRRITOCCURS.EYE:IMMED FLUSH W/LG AMTS OF WATER FOR @ LEAST 15MINS
OPENING EYELIDS.DON'T NEUTRALIZE.GET MED ATTN ASAP.FLUSH 15MINS
MORE IF NO MED ATTN.(SEE SUPPLEMEN)

Flash Point Method:CC
Flash Point:-4F,-20C
Lower Limits:1.1
Upper Limits:7.5
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:USE STD FIREFIGHTING TECHNIQUES.WEAR
FULL-FACE,SCBA & IMPERVIOUS PROTECTIVE CLOTHI.USE WATER SPRAY TO
COOL EXPOSED SURFACES/CONTAINERS.AVOID BREATH COMBUST PROD
Unusual Fire/Explosion Hazard:PREVENT HUMAN EXPO TO FIRE/SMOKE/COMBUST
PROD.REMOVE NONESSENT PEOPLE.AVOID SPARKS,FIRE,HOT METAL
SURFACES.HIGHLY FLAMM DUE TO SOLVT.VAP FORM EXPLOS MIX W/AIR.

Spill Release Procedures:WEAR PROTECT CLOTH/GOGG.SHUT OFF IGN
SOURCES.CONTAIN SPILL/LEAK.SOAK UPW/SUITABLE
ABSORBENT(SAWDUST/CLAY/OIL ABSORBER).SWEEP UP ABSORBED MATL.PLACE
IN CHEM WASTE DRUM.WASH AREA W/DETER & WATER.FLUSH W /WATER.DIKE LG
SPILLS & PUMP INTO DRUM.
Neutralizing Agent:NONE SPECIFIED BY MFG.

Handling and Storage Precautions:AVOID SKIN/EYE CONTACT.USE ONLY IN
WELL VENTILATED AREA.KEEP AWAY FROM ALL HEAT SOURCES.KEEP CNTNRS
CLOSED WHEN NOT IN USE.NEVER LAY CNTNRS ON SIDES.
Other Precautions:CAONTAC LENS WEARERS TAKE APPROPRIATE PRECAUTION. USE
NON-SPARKING TOOLS WHEN CLEANING UP SPILLS. STATIC ELECTRICITY MAY
ACCUMULATE AND CASUE A FIRE HAZARD. KEEP AWAY FROM HEAT, SPARKS,
FLAMES.

Respiratory Protection:MATL SHOULD BE HANDLED IN OPEN OR WELL
VENTILATED AREA. WHERE ADEQUATE VENTILATION IS NOT AVAILABLE USE
NIOSH APPROVED ORGANIC VAPOR RESP. WHERE EXPOSURE NECCESITATES
HIGHER LEVEL OF PROTECTION, A + P RESSURE AIR SUPPLY RESP IS
RECOMMENDED.
Ventilation:LOCAL EXHAUST IS REQUIRED & GENERAL MECHANICAL VENTILATION
IS SUFFESTED IN CLOSED AREA.
Protective Gloves:PLASTIC FILM OR RUBBER GLOVES.
Eye Protection:PROTECTIVE GOGGLES OR GLASSES.
Other Protective Equipment:SAFETY SHOWERS AND EYE BATH STATIONS SHOULD
BE AVAILABLE.
Work Hygienic Practices:AVOID PROLONG VAPOR BREATHING & CONTACT
W/SKIN/EYES.WASH HANDS WELL AFT HANDLING MATL.WASH CONTAMIN CLOTH
BEFORE REUSE.
Supplemental Safety and Health
1STAID INHAL:REMOVE FROM AREA.GET MED ATTN IF BREATH DIFFI.OXY MAY BE
GIVEN UPON DR'S ADVICE.NOT BREATH GIVE ARTI RESP PREFERRABLY MOUTH
TO MOUTH. HCC ONLY FOR PRIMER PART OF KIT--GSA DIDN'T SUBMIT 2N D
PART OF KIT.

HCC:F2
Boiling Pt:B.P. Text:156F,69C
Vapor Pres:<155
Vapor Density:3.0
Spec Gravity:0.82
Evaporation Rate & Reference:>1, BUAC=1.
Solubility in Water:INSOLUBLE (NOT SOLU)
Appearance and Odor:COLORLESS, TRANSPARENT LIQUID WITH SOLVENT ODOR.

Stability Indicator/Materials to Avoid:NO
WATER, ACIDS, ALKALIS.
Stability Condition to Avoid:ACTIVE INGREDIENTS REACT WITH WATER,
ACIDS, AND ALKALIS, BUT DO NOT PRESENT A HAZARD.
Hazardous Decomposition Products:METHANOL AND 2-PROPANOL.

Waste Disposal Methods:MAERIAL THAT CANNOT BE USED SHOULD BE DISPOSED
OF IN EPA AUTHORIZED FACILITY. DISPOSE OF EMTPY CONTAINERS
ACCORDING TO ANY APPLICABLE REGS UNDER RESOURCE CONSERVATION &
RECOVERY ACT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.